insumos para la industria
home about us
contact
products services
map
espanol
  • Coatings Coatings We produce a wide range of foundry coatings used also in the forge industry. Our service includes advising in the selection and application process of the products. We also adapt our products compositions to our clients’ necessities and processes in special requirements’ cases.

    Our Product lines are divided in :< br />
    - Refractory paints
    - Release agents
    - Greases
    - Glues
    - Cosmetics
  • Graphite Products Graphite Products We offer graphite products for mechanical purposes such as seals, bearings and gaskets; also for electrical purposes like graphite brushes. Then, is our wide range for mixing and degassing non-ferrous molten metals’ purposes products such as pipes, rods, rotors, propellers, pumps and shafts.

    - We offer a according to our client’s measurements and designs fabrication.

    - We also have a reparation service in wear down graphite pieces which is a very good option that economizes expenses.
  • &lt;br /&gt; Thermocouples
    Thermocouples     We fabricate the thermocouple elements in its different J, K, N, T, E, R, S and B types with its ceramic isolation parts; we also have a wide range of silicon-carbide, silicon-oxynitride, sialon, oxidized alum, stainless steel and graphite thermowells in different sizes. We can offer each part separately and/or provide the whole thermocouple from its head till its thermowell and extension cables.
  • &lt;br /&gt; Crucibles
    Crucibles     The crucibles that we offer produce the highest quality metal in the market and clearly demonstrate the following advantages:

    1. Low foundry loss
    2. Better metallurgic conditions
    3. Maximum flexibility
    4. Lower capital cost and ground space economy
    5. Maintenance reduced cost

    With more than 10 different crucible kinds we can provide a tailor made and for specific necessities crucible.

    Our silicon-carbide crucible bases and nozzles which assure a better molten metal pouring are also available in different sizes.
  • Ceramic Fibers Ceramic Fibers Fabricated without binding agents, the ceramic fibers provide an excellent chemical attack resistance. They resist petroleum and water attacks as well and the physical properties are reestablished after drying.

    They are though natural silicon-alumina form kaolin built.
    It’s available in a wide range of densities, sizes and forms offering an excellent temperature stability and isolation security.
  • Exothermic Sleeves Exothermic Sleeves We commercialize a wide range of open, close and cone form sleeves in different sizes.

    We also offer the respective exothermic caps for them.
  • Fire Bricks Fire Bricks Insulating Brick: These refractory insulating bricks are high porosity built and because of their fabrication process they are allowed to retain the temperature in industrial furnaces. Because of their low thermal conductivity and their high temperature resistance it is recommended for furnace exteriors, this way the temperature control it is easier, there is a lesser combustible usage and heating time.
    Standart fire brick: It is a refractory brick with a wide application usage like in furnaces, boilers and high temperature resistance industrial applications. This kind of brick has a capacity of 1665° C – 3029° F and comply with the D.G.N. for the C kind specifications. This kind of refractory bricks are fabricated by the stiff mudd process, they are highly slag attack, chemical corrosion, abrasion and temperature changes resistant.
    We offer the insulating bricks and dense fire bricks in different geometries and capacities depending on the application and the client’s necessities.
  • Clays, Cements and Mortars Clays, Cements and Mortars Refractory Cements: Fabricated with high alumina and resistant to slag, abrasion and chemical attacks, these cements are used in the metal cast and monolithic cold splashed pieces processes in rotational furnaces, burners, etc. Limit temperature usage 1650° C.

    Clays: The fine grain is recommended for thin thickness joints were strong adhesion is needed after the heating. The middle grain is recommended for wider thickness joints.

    Mortars: offered as a ready for use paste, this type of mortars can resist up to 1600°C - 3002°F. We offer the standard fire brick type and the silicon high and medium alumina insulating brick type.
  • Equipment and Supply Equipment and Supply Our wide range of equipment and supply products such as steel dowels, molding plates, metal and number letters, core box air-release vents and vibrators are mostly used for model making purposes. We also offer the chemical products needed in the copying, forming and/or restoring of any model. Within these chemical products are binders, resins, urethanes, polyurethanes, epoxides, glues and calibrated waxes.